Eusense Technologies

The Danfoss LLS 4000 Electronic Liquid Level Switch is a compact, cost efficient, and reliable switch for liquid level measurements.

With simple, one-point installation, smart commissioning via Bluetooth, and next-level reliability thanks to its Safety Integrity Level classification, the LLS 4000 makes electric liquid measuring smarter and more reliable than ever.

With the LLS 4000, Danfoss is changing the electronic liquid level switch game entirely. Offering superior reliability, cost-efficiency and user-friendliness the LLS 4000 electric level switch offers superb performance compared to mechanical alternatives - at a competitive price.

DST P40I pressure transmitter

For use in corrosive environments, Danfoss offers the new robust DST P40I pressure transmitter made of Titanium and with ceramic pressure sensing element. DST P40I is optimized for use in applications such as desalination systems, seawater cooling, and chemical processing. The transmitter housing is made from high-strength Titanium Grade 2, which is exceptionally resistant to a wide range of acids, alkalis, Sodium Chloride, and polluted water. The pressure sensing element is made from ceramic AI2O3 96% with superior chemical immunity. The pressure transmitter works following the piezo resistive principle, and the Wheatstone Bridge is printed directly on the inside of the ceramic diaphragm to ensure fast response time and a high degree of precision in measurements. DST P40I has been designed and tested to be highly resistant to continuous vibrations and cavitation in reverse osmosis desalination pump systems.

Features and benefits 

• High corrosion resistance, designed for use in harsh environments
• Transmitter housing made of Titanium Grade 2
• Ceramic sensing element made of AI2O3 96%
• Pressure range 0-100 bar (standard) 
• Accuracy ± 1.5% FS (typical)
• Temperature range 0-80°C
• Output signal: 4 – 20 mA
• Outstanding shock and vibration performance
• Excellent EMC immunity, ensuring a failsafe measuring signal

        

 

The DST P300 pressure transmitter is a smart sensor solution for electrical connectors and pressure ports in a variety of water, air, and cooling applications. The robust pressure measurement is enhanced with the ability to customize diagnostics, opening the door to flexible and scalable performance, increased efficiency, and reliability even in the harshest conditions.
An intelligent solution built to improve a machine’s up-time and decrease field failures, the sensor self-monitors for internal fault conditions, sending a signal to the main controller for fast and precise troubleshooting — saving both time and cost. The high-performance construction of the sensor is shock- and vibration-resistant for use in high electromagnetic machinery.

Features and benefits 

• Quality + Confidence –reliability
• Designed to confidently fit-and-forget, with a fully welded design and zero drift construction ensuring safety and long-term stability.
• High Performance
• Robust, shock- and vibration-resistant solution with high-electromagnetic compatibility harsh water, air, and marine applications.
• Longer component lifespan and reduced warranty cost.
• Digital Innovation
• Smart sensor electronics lay the groundwork for connectivity and future customized equipment development.
• Diagnostics – preventative maintenance
• Automatic failure detection enables fast troubleshooting and preventative maintenance, significantly reducing machine downtime.
• Future-Proof Features
• Prepare for future digital communication with Danfoss’ ASIC high-precision digital signal processor.
• Get access to programmable features that adjust to an application’s specific needs.
• Partnership + Application Expertise
• Decades of frontline market experience combined with industry-leading innovations means we are committed to supporting your journey now and into the future.

    

ECtemp 316 is a simple electronic thermostat with enhanced functionality which can be installed in electric cabinets with DIN rail attachment. The thermostat is mainly used for frost protection on roofs, in gutters and downpipes. It can be also used to control ventilation, cooling or snow melting on ground, pipe tracing and similar installations.
Applications
Roofs, gutters, downpipes, drain lines
Ground, walkways, outdoor steps
Pipe frost protection
Tank frost protection
Sprinkler systems

Features and benefits using outdoor analogue controllers 

• For DIN rail and surface installation 
• Low temperature area.
• Large application area
• LED indicator
• Terminals for NO/NC connection

The pneumatic valve is a real trouble shooter solution for difficult conditions; it allows very large flow rates, it can operate from zero differential pressure and with high media temperatures, it operates at high viscosities and with dirty media, and it operates in EEx areas, merely by placing the pilot valve outside the area. The valve is equipped with a pneumatic actuator supplied by a three-way solenoid valve. The pressure of the pilot medium enters the actuator cylinder and acts on the piston, which allows the seal to open or to close through the stem. The return of the seal into its rest position is usually achieved by a return spring that can be found in the pneumatic actuator.

Application for pneumatic valves

The trouble shooter valve has a countless number of application possibilities:

• Cooling
• Pre-heating
• Sterilizers and autoclaves
• High pressure lubrication
• Steam distribution
• Bottling
• Equipment for textile production
• Equipment for industrial steam pressing
• Mixing of paints, inks and colours
• Equipments for industrial washing and cleaning

The VDH/VDHT solenoid valve is used to control the flow direction in high-pressure water applications. The solenoid valve is pilot operated On/Off seat valve electrically activated by a coil and is available for a wide range of flows and pressures.

The valves are used in several applications: car wash systems, stationary high pressure cleaning, mobile cleaning vehicles and dust bindings systems, fire fighting water mist systems etc.

The VDHT valve series are designed for several applications in neutral media compatible with the sealing and O-ring materials used. Typical media are water, cleaning fluids and light heating oil.

Features and benefits

 

 

• Corrosion resistant
• Easy to install and maintain
• High reliability
• High degree of enclosure, IP67

   

The Danfoss gas detecting sensor, DGS, is designed to help you comply with the environmental F-gas regulation and health and safety requirements.

The DGS can be mounted on new or existing systems in supermarkets, process refrigeration plants, refrigerated storage/ warehousing, or in other special applications or areas/zones.

Features and benefits

•   Quick and immediate response in detecting a wide range of different gases applied in food retail refrigeration

• Can be used as stand-alone or integrated in your system

Provides continuous, real-time automatic monitoring and alarms

Easy configuration and installation

• Open Modbus connection enables easy communication with the refrigeration system PLCs
• Stand-alone GD units with integrated relays can be directly connected to external systems.
• The GD Controller Unit comes with 4 alarm relays available for external looped alarm devices, e.g. emergency fans, emergency ventilation, emergency shut-down, etc.
• The Danfoss GD Controller unit enables subsystem and/or unit controlling. In total 96 sensor heads can be handled via Fieldbus + 4 analog input (an additional 28 analog input possible with 7 expansion modules)
• Possible to add up to 7 expansion modules, allowing 7 additional segments with a total of 7200m (23622 ft.) wiring and a total of 32 relays for alarm device circuits.

"aira" make 2/2 Way Pneumatic Operated On/Off Angle Type Control Valve IC SS 304 BodyNormally Closed Screwed End BSP With SOV Solenoid Valve 230 V AC

Y Type ValveActuator : SS 304 PressedValve Body : IC SS 304 BodyWorking Part : SS 304Seal : PTFEMedia : SteamPressure : Up to 10 BarTemperature : 180 °CPne. Pressure : 3.5 to 7 Kg/Cm2End Connection : Screwed End


Solenoid DescriptionBody : Aluminum Pressure Die CastLine Pressue : 3.5 to 7 Kg/Cm2Media : AirCoil Voltage : 230 V.ACWatt : 8 WATTEnclosure : Weather ProofTemperature : 80° C